There is no Asic Boost build for the Antminer L11 yet, it is still in development. As soon as the build is stable and has passed testing on real hardware, the file will appear on this page. Until then, here is what is known about the miner itself and what the firmware will bring.
Firmware in development
Asic Boost for the Antminer L11 has not been released yet. We are waiting for a stable build and testing it on hardware before we publish the file. Message support and we will let you know when it is out. Firmware for the Antminer L7 and L9 is already available.
The Antminer L11 is a Bitmain Scrypt miner for Litecoin and Dogecoin. Stock hashrate is 20 GH/s at around 3680 W, which works out to roughly 184 J/G. Air cooling with four fans, RJ45 networking, 220 to 277 V input.
Asic Boost is custom firmware for Bitmain miners. It replaces the stock firmware and adds overclocking, undervolting, per-chip autotune, power profiles and a web panel with monitoring. No such build exists for the L11 yet, so we are not quoting gain figures for this model: those can only be given after testing.
| Algorithm | Scrypt, merged mining of LTC and DOGE |
|---|---|
| Stock hashrate | 20 GH/s |
| Power draw | 3680 W |
| Energy efficiency | about 184 J/G |
| Cooling | air, four fans |
| Noise level | about 75 dB |
| Power input | 220 to 277 V, 50 to 60 Hz |
| Network | RJ45, 10/100 Mbit |
| Dimensions | 400 × 195 × 290 mm |
Figures from the manufacturer and hardware resellers. Values can vary slightly between batches.
On the Scrypt models already released, the L7 and L9, the developer fee is 2%.
There is no exact date. The build will appear on this page as soon as it passes testing. Message support and we will tell you when it is out.
No. A build is tied to the model and to the control board type. A file from another model will not work: the miner will reject it, and in the worst case it will stop booting.
The Antminer L7 and L9. Builds for them are released and each has its own page in the firmware section.
Overclocking, undervolting, per-chip autotune, power profiles and a web panel with monitoring. Concrete gain figures will follow testing on this model.
Yes. On Bitmain miners the rollback to stock is done from the miner menu in one step.
Builds for the rest of the Bitmain range are ready. Pick your model and control board in the firmware section.
Advice on Hashcore software, installing, configuring and updating firmware for ASIC miners.
Partner program
Run a large ASIC fleet? We'll build you a custom firmware with your logo and your chosen DevFee percentage. And if you want to distribute firmware under your own brand, we'll onboard you as a distributor partner.
