+34 641 10 27 16

Denys Klimchuk, founder of AsicBoost and ASIC miner engineer

Author of asic.es materials

Denys Klimchuk

Founder of AsicBoost, mining hardware engineer

Has been repairing mining hardware since 2018, first in Ukraine, now in Valencia. Writes software and AsicBoost firmware for Antminer. Chief engineer at ASIC MINER SLU, he carries the whole technical side, from autotuning code to checking machines before they ship.

  • LocationValencia, Spain. Works across the EU
  • CompanyASIC MINER SLU, founded in 2026
  • In electronicsSince 1999, started with phones
  • In miningSince 2017, more than 8 years
  • FocusChip tuning on SHA-256 and Scrypt, efficiency in J/Th
  • Role in the projectAsicBoost firmware code, machine checks before shipping

01Who he is and what he does

Denys Klimchuk was born in 1981 in Moldova. At eighteen he started fixing mobile phones, later he opened the CDMA CLUB service centre. The approach has stayed the same since: a meter tells you more than a guess.

In 2017 he switched to mining hardware. A year later he moved to Kyiv and opened the ASIC CLUB service centre, where he repaired Antminer hash boards and power supplies. In 2022 he moved to Spain, to Valencia, and a year later was repairing miners again, this time here. In 2026 he founded ASIC MINER SLU. The company site is asic.es.

He works with what sits behind the web panel: frequencies and voltages per chip domain, autotuning, how a board behaves under load. Factory spec numbers say little here. The real picture comes from the miner log and the hash board sensors an hour into the run, once everything is hot.

AsicBoost is his firmware brand for Bitmain Antminer, and he develops it alone: architecture, builds for each model, the web panel, autotuning. The catalogue holds more than 45 models of the S19, S21, T19, T21 and L7 series on two algorithms, SHA-256 and Scrypt. The developer fee is 2.8 percent for any model and any mode.

Electricity in Spain is expensive, and that shapes the workshop: a machine at around 30 J/Th is worth optimising rather than running as is. The firmware has one job here: pull more hashrate out of the iron already in the rack, on the same kilowatt. Repair experience matters more than programming experience for that. Anyone who has seen a hash board after a year at limit frequencies sets autotuning numbers more carefully.

Besides the firmware he handles the technical side of the shop: he checks machines before shipping, works through failures, writes the documentation. The guides on unlocking the AML board over UART, the decoding of Antminer logs, the manufacturer write-ups and the chip tables on the site were written by him. He runs support himself on Telegram, with no call centre and no ticket system. Videos go on YouTube.

Overclocking is always a trade-off. A machine on custom firmware runs outside the factory mode, the maker warranty does not cover it, and the fans and the power supply wear out faster. We say this before the purchase, not after.

02The path

Short version, by dates and cities.

  • 1999
    MoldovaAt eighteen he started repairing mobile phones. Later he founded the CDMA CLUB service centre.
  • 2017
    CryptocurrenciesMoved to mining hardware: first as an owner of machines, then as the engineer who repaired and tuned them.
  • 2018
    KyivFounded the ASIC CLUB service centre. Repair of Antminer hash boards, power supplies and control boards became his main work. The ASIC CLUB site
  • 2022
    ValenciaMoved to live in Spain.
  • 2023
    Workshop in SpainWent back to repairing mining hardware, now for the Spanish and European market.
  • 2026
    ASIC MINER SLURegistered the company in Spain. The company site is asic.es.

03Lines of work

The same hands fix the boards and build the firmware, so each line feeds the others.

  • Repair and diagnosticsAntminer hash boards, control boards, power supplies and cooling. The log and the sensors first, the soldering iron after.
  • AsicBoost firmwareOverclocking, undervolting and autotuning for 45 models. Built and tested on real machines, under load.
  • Log readingfind 0 asic, autotune fail, CRC: the log lines usually show which board is failing and why.
  • Pre-shipping checksEvery machine goes through the bench: hashrate and temperatures under load.
  • DocumentationFlashing guides, AML board unlocking, chip tables and knowledge base handbooks.
  • Support and videoHe answers Telegram questions himself; guides with real hardware go out on YouTube.

04Official security guarantees for AsicBoost software

The firmware goes onto the machine with full rights and runs unattended for months. The question "what is inside" is a fair one. I answer it in my own name.

  • As the sole developer and brand owner of AsicBoost, I take personal reputational and technical responsibility for every line of code in all official releases of our software.
  • The software is distributed with closed source code (proprietary) for the sole purpose of protecting intellectual property, safeguarding our energy-efficiency algorithms, and preventing malicious third parties from creating dangerous modifications that could damage the hardware.
  • All official files available for download on the asic.es domain undergo rigorous testing, are digitally signed, and feature verified checksums (SHA-256) in the downloads section. The code is completely free of undocumented functions or malware. The development fee (DevFee) is strictly fixed at 2.8 percent, transparent, and fully visible to the user.

How to check the file before installing

You do not have to take my word for it, the hash takes five seconds. Download the build from your model page, compute the sum and compare it with the one printed next to the link. If it does not match, the file came from somewhere else. Do not install that one.

SystemCommand
Windows, PowerShellGet-FileHash .\firmware.tar.gz -Algorithm SHA256
Windows, cmdcertutil -hashfile firmware.tar.gz SHA256
macOSshasum -a 256 firmware.tar.gz
Linuxsha256sum firmware.tar.gz
AsicBoost files are handed out through asic.es only. We post nothing on file hosting sites, in outside Telegram channels or on forums. We cannot answer for whatever sits there under our name.

Whose signature is on it

Behind the firmware stands a company registered in Spain, with a registry number and an owner who has a first name and a surname.

Legal entity
ASIC MINER SLU
Founded
2026
Owner and developer
Denys Klimchuk

05Profiles in professional communities

06Articles and technical guides

07Write directly

Updated on 7 August 2026